Flortex Flexiset SP
A flexible polyurethane, single pack paint which is hard wearing with good chemical resistance.
- Tough polyurethane coating
- Ideal for Asphalt floors
- Highly flexible
- Smooth or slip resistant
- Semi-gloss finish
- High solids content
- Good oil and chemical resistance
€161.72 (ex VAT)
Flortex Flexiset SP Product Details
Formulated from one of the latest resin technologies, Flortex Flexiset SP is a flexible polyurethane, single-pack paint, that is hard wearing and oil and chemical resistant. It is incredibly tough, very long lasting and has excellent flexibility.
Flortex Flexiset SP is a fast curing formulation that ensures less downtime and aggravation, and can be applied at low temperatures down to 5oC
Two coats normally required.
Flortex Flexiset SP is typically used in warehouses, factories, showrooms, workshops, hotels, farms and garages. It is ideal for use on asphalt and other flexible surfaces.
6kg unit covers up to 45sq.m.
Number of parts:1
Application Temperature:Above 5oC
Drying Time:6 – 8 hours
Recoatable:After drying overnight
Number of coats:2
Please consult the technical data sheet for full technical product data.
Preparation:Thorough substrate preparation is essential.The surface must be clean, dry and free from dirt, grease and other contamination. New concrete should be left for at least 3 months before painting, and a moisture check should be carried out to ensure this lies within acceptable limits. Hard concrete or granolithic surfaces should be treated with Polycote Etch IT to improve adhesion, and any surface grease or contamination chemically removed using Polycote Degrease IT. These treatments must be thoroughly rinsed off and the surface allowed to dry before painting. Pits and holes may be filled using Polycote Cretex products. Please refer to relevant Data Sheets.
Stir thoroughly before use to ensure full dispersion of solids throughout the mix.
Apply by roller or brush. If the area has not previously been treated, thin the first coat with 10% White Spirit to improve penetration and adhesion working well into the surface. Apply full second coat. On previously sealed floors apply two full coats. On previously painted surfaces one full coat may provide adequate coverage.
Avoid applying too thickly – two normal coats produce a far better result than one thick one, which may hinder the drying out.