Specialist metal epoxy primer
- Very easy to apply
- Ideal for food environments
- Outstanding adhesion to metal
- Safe to use – non-toxic, non-taint
€175.23 (ex VAT)
ZP Primer Product Details
ZP Primer is an epoxy priming coat especially formulated for outstanding adhesion to metal surfaces.
Use on: Metal, concrete. For other substances contact Polycote Experts.
Use where: Internal/External
Typical industries: Animal, medical, food processing and working environments
Type of job: Preparation of metal and other substrates prior to overcoating with Polycote Flortex coatings
Approximate coverage: 5 kg unit – 20-25m2
Special features:Non-toxic, non-taint, high adhesion, easy to use
Pot life:30 mins @ 20oC
Application temperature:10oC – 30oC
Cure time: Pedestrian traffic – 6 hours @ 20oC
Light wheeled traffic – 24 hours
Heavy duty traffic – 36 hours
Number of parts supplied:2
Priming for:Polycote Flortex products
Please consult the technical data sheet for full technical product data.
Preparation:Thorough substrate preparation is essential.Recommended methods are:Loose paint or rust – remove, using a Vacuum Assisted Shotblaster, Floor Grinder or equivalent mechanical abrasion method. All loose/flaky paint and rust must be removed before coating.Oil or grease – chemically clean with Polycote Degrease IT then rinse thoroughly and allow to dry. See relevant Data Sheet prior to application.Existing Paint – this should be fine, as long as the area is clean and dry, however we advise that a test patch is carried out prior to fully overcoating.Once prepared, the area must be kept clean and free of traffic.
Having fully prepared the substrate, stir the individual components before mixing together.Add part ‘B’ to part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a slow speed drill with a mixing paddle.Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Apply by brush, roller or squeegee, making sure that the surface is completely covered. Particular attention should be given to doorways and other areas of high traffic.When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.